HP StorageWorks MSL6000 Tape Library - Manual (Page 63)

MSL6000 series tape library user guide 63
SCSI Options
Selecting this option lets you view the settings defined from the SCSI option in the Edit Options
area (see Figure 49 ).
NOTE: You can move to the next sequential SCSI Options screen by selecting the T. To return to
the previous SCSI Options screen, select the S or Back button to return to the Menu screen.
Figure 49 View SCSI options
Table 6 lists and describes the available SCSI Options selections. (See ” Tape Drives ” on page 16
for an illustration of the drive numbering scheme.)
Barcode Reader Lets you enable or disable the bar code reader retries option.
The default is Retries Enabled.
Module Configuration Lets you configure a library for Standalone, Master, or Slave
operation. The default is Standalone.
Library Auto Power-On Mode Lets you enable or disable an automatic library power-on after a
power loss without the need to touch the GUI screen. The default
is Enabled.
Table 5 View Library Options (continued)
Option Description