HP StorageWorks MSL6000 Tape Library - Manual (Page 29)

MSL6000 series tape library user guide 29
2 Installation
This chapter explains how to install an HP StorageWorks MSL Series tape library. Sections in this
chapter include:
• Converting a Tabletop Model to a Rackmount Model , page 29
• Setting Up the Rackmount Model , page 30
• Converting a Rackmount Model to a Tabletop Model , page 34
• Applying Power to the Library , page 35
• Cabling for SCSI Configurations , page 36
NOTE: Be sure to keep and store all shipping materials from your MSL Series tape library for
potential future use.
Converting a Tabletop Model to a Rackmount Model
To make a tabletop library ready for rack enclosure installation:
1. Remove the rubber feet.
2. Remove the cover.
3. Attach the inner rails to the library using the supplied Allen wrench and screws. Tighten the
screws until snug.