HP StorageWorks MSL6000 Tape Library - Manual (Page 120)

Troubleshooting 120
3084 UnSupported Drive For Requested
Operation
(Unsupported drive type.)
• Make sure the media type used is
compatible with the drive.
• Press the Enter button to clear the
message.
• Invalid user initiated operation. Set
parameters correctly and try again.
308F No Retry On Fetch/Stow
(The loader retried an operation and
retries were disabled.)
• Press the Enter button to clear the
message.
• Invalid user initiated operation. Set
parameters correctly and try again.
• Ensure configuration options are set
correctly.
3100 Picker Jammed
(The picker jammed during a bin stow
operation.)
• Press the Enter button to reboot.
• Cycle power to the library or reboot
using the GUI touch screen.
• Ensure that there are no obstructions
inside the library (all cartridges are in
magazines).
• Ensure cartridges are fully inserted in the
magazine(s).
3102 Picker Jammed 2
(The picker jammed during a bin stow
operation.)
• Press the Enter button to reboot.
• Cycle power to the library or reboot
using the GUI touch screen.
• Ensure that there are no obstructions
inside the library (all cartridges are in
magazines).
• Ensure cartridges are fully inserted in the
magazine(s).
3103 Picker Jammed 3
(The picker jammed during a bin stow
operation.)
• Press the Enter button to reboot.
• Cycle power to the library or reboot
using the GUI touch screen.
• Ensure that there are no obstructions
inside the library (all cartridges are in
magazines).
• Ensure cartridges are fully inserted in the
magazine(s).
Table 10 Fault Symptom Codes (continued)
FSC Message ERP