HP StorageWorks MSL6000 Tape Library - Manual (Page 41)

MSL6000 series tape library user guide 41
Figure 22 SCSI ID confirmation screen
d. Touch OK to confirm. A new SCSI ID now appears in the Drive 0 Bus ID data field (see
Figure 23 ).
Figure 23 Drive 0 bus ID data field screen (two-drive model shown)
4. Repeat this procedure to set any remaining SCSI IDs.
IMPORTANT: Do not set duplicate IDs, all SCSI IDs must be unique.
5. Touch the Back button repeatedly to return to the Main menu screen.
Setting Up a Reserved Slot
Use this option to designate one or more tape cartridge data storage slots as a cleaning slot, or to
reduce the number of storage elements visible to the application software (for licensing reasons).
!