HP SAN Virtualization Services Platform - Manual (Page 178)

Comments Description Property Name
The current statuses of the element.
The following text describes how the pro-
vider sets the first element of the Operation-
alStatus and ExtentStatus array properties
unless otherwise stated. The Snapshot- De-
tails.SnapshotStatus and SnapshotDetails.
SnapshotState determine the allowed val-
ues for OperationalStatus and Extent- Status
as follows.
• statusInit, OperationalStatus = 8
"Starting" and ExtentStatus = 2 "Not
Applicable"
• Else statusNormal, then given the values
of volState as follows:
• If (stateRollback | stateRestore),
OperationalStatus = 2 "OK" and
ExentStatus = 11 "Rebuild"
• statePauseDelete | stateAbsent)
OperationalStatus = 15 "Dormant"
and ExtentStatus = 2 "Not Applic-
able"
• else OperationalStatus = 2 "OK"
and ExtentStatus = 2 "Not Applic-
able"
• if ( statusPartial , then set Operational-
Status = 3 "Degraded" and Extent-
Status = 3 "Broken"
• Else OperationalStatus = 2 "OK" and
ExtentStatus = 2 "Not Applicable"4
• If OwnedByHost is also present, 15 "In-
Band Access Granted"
OperationalStatus[]
Indicates the current health of the
element.
Discern this value from the Snapshot Status:
• statusInit, statusNormal: HealthState =
5 ("OK")
• statusPartial: HealthState = 10 ("De-
graded/Warning")
•
HealthState.
Size in bytes of the blocks which
form this StorageExtent.
512 BlockSize
Total number of logically contigu-
ous blocks, of size BlockSize, which
form this Extent.
NumberOfBlocks
The maximum number of blocks, of
size BlockSize, which available for
consumption when layering using
the BasedOn association.
ConsumableBlocks
Indicates whether the underlying
StorageExtent(s) participate in a
StorageRedundancyGroup.
false
IsBasedOnUnderlyingRe-
dundancy
Replication Services Profile 178