HP SAN Virtualization Services Platform - Manual (Page 171)

Method parameters
IN/OUT Comments Type Parameter Name
In only
Specified HPSVSP_ReplicationServiceCapabilities-
SupportedReplicationTypes.
uint16 ReplicationType
Out only Specific SNIA_GroupSynchronized.CopyState(s ). uint16[] SupportedCopyStates
GetSupportedFeatures
Method overview
For a specified HPSVSP_ReplicationServiceCapabilities.SupportedReplicationTypes, return supported
features.
Method parameters
IN/OUT Comments Type Parameter Name
In only
Specified
HPSVSP_ReplicationServiceCapabilities.SupportedReplicationTypes.
uint16 ReplicationType
Out only
Available supported features:
• 2 ( Replication groups )
• 3 ( Multi-hop element replication )
• 4 ( Multi-hop elements must have same SyncType )
• 5 ( Multi-hop requires advance notice )
• 6 ( Requires full discovery of target ComputerSystem )
• 7 ( Service suspends source I/O when necessary )
• 8 ( Targets allocated from any storage pool )
• 9 ( Targets allocated from shared storage pool )
• 11 ( Targets allocated from multiple storage pools )
• 12 ( Targets require reserved elements )
• 14 ( Source is associated to SynchronizationAspect )
• 15 ( Error recovery from broken state automatic )
• 16 ( Target must remain associated to source )
• 18 ( Synchronized clone target detaches automatically
)
• 21 ( Restore operation requires fracture )
• 22 ( Resync operation requires activate )
uint16[] Features
GetSupportedGroupFeatures
Method overview
For a specified HPSVSP_ReplicationServiceCapabilities.SupportedReplicationTypes, return supported
group features.
SAN Virtualization Services Platform SMI-S User Guide 171