HP SAN Virtualization Services Platform - Manual (Page 170)

IN/OUT Comments Type Parameter Name
Out only
Corresponding locality
• 2 ( Local )
• 3 ( Remote )
• 0x8000.. ( Vendor Specific )
uint16 LocalOrRemote
Out only
Specific SNIA_Synchronized.Mode
• 2 ( Synchronous )
• 3 ( Asynchronous ) 0x8000 ( Move )
• 0x8001.. ( Vendor Specific )
uint16 Mode
Out only
Specific SNIA_Synchronized.SyncType
• 6 ( Mirror )
• 7 ( Snapshot )
• 8 ( Clone )
• 0x8000.. ( Vendor Specific )
uint16 SyncType
GetSupportedCopyStates
Method overview
For a specified SNIA_ReplicationServiceCapabilities.SupportedReplicationTypes, returns the supported
SNIA_Synchronized.CopyState(s) and a parallel array of host accessibilities.
Method parameters
IN/OUT Comments Type Parameter Name
In only
Specified HPSVSP_ReplicationServiceCapabilities.Sup-
portedReplicationTypes.
uint16 ReplicationType
Out only
Specific SNIA_Synchronized.CopyState. Each member
in this array is paralleled in HostAccessible.
For a target element in the specific
SNIA_Synchronized.CopyState[n..],HostAccessible[n..]
indicates host accessibility.
uint16[] SupportedCopyStates
Out only
HostAccessible[n..]indicates if the target element in
the specific SNIA_Synchronized.CopyState[n..] is host
accessible.
boolean[] HostAccessible
GetSupportedGroupCopyStates
Method overview
For a specific HPSVSP_ReplicationServiceCapabilities.SupportedReplicationTypes, return the supported
replication group SNIA_GroupSynchronized.CopyState(s).
Replication Services Profile 170