HP SAN Virtualization Services Platform - Manual (Page 161)

IN/OUT Comments Type Parameter
Name
In only
Method must wait until the UnSynchronized CopyState
is reached before returning.
This parameter shall be null.
uint16
WaitFor-
CopyState
In only
Overrides the default group consistency. This paramet-
er shall be NULL.
• 2 ( No Consistency )
• 3 ( Sequential Consistency )
• .. ( DMTF Reserved )
• 0x8000.. ( Vendor Specific )
uint16 Consistency
Out only
Reference to a created instance of a distinct operation-
specific subclassGroupSynchronized between the
source and the target elements. If a task is created,
this parameter may be null until the association is ac-
tually formed.
SNIA_Synchronized
ref Synchroniza-
tion
Out only
Created ConcreteJob instance depending on the type
of operation created:
• Snapclone, migration, or asynchronous mirroring:
HPSVSP_MultiAppJobGroup
• Note that an instance of HPSVSP_MultiAppCon-
creteJob is also created to represent the first
MultiApp job.
CIM_ConcreteJob
ref
Job
CreateSynchronizationAspect
Method overview
This method is used to create a VSM PiT on a virtual disk, snapshot, virtual disk group, or group
snapshot.
An instance of a subclass of SynchronizationAspect is created to represent the PiTt together with an
instance of SettingsDefineState associating it to the source VirtualDisk, Snapshot, VirtualDiskGroup,
or Group Snapshot.
Method parameters
IN/OUT Comments Type Parameter Name
In only
A end user relevant name for the PiT being
created.
string Name
In only
SyncType describes the type of copy that
will be made.
• Pit - 7 ( Snapshot )
uint16 SyncType
SAN Virtualization Services Platform SMI-S User Guide 161