HP SAN Virtualization Services Platform - Manual (Page 165)

• 1 (Not Supported)
• 4 (Failed)
• 5 (Invalid Parameter)
Method parameters
IN/OUT Comments Type Parameter Name
In only
• 8 ( Detach ) - Detach an asynchronous
mirroring job or detach a synchronous
mirroring job
• 9 ( Dissolve ) - Delete a snapshot
• 14 ( Resync Replica ) - Continue an
asynchronous mirroring job or Re-
sume/Resync a synchronous mirroring
group
• 15 ( Restore from Replica ) - Restore a
virtual disk from a snapshot
• 16 ( Resume ) - Continue a snapclone
or migration job
• 19 ( Return To ResourcePool ) - Delete
a snapclone job or asynchronous mir-
roring job
• 21 ( Split ) - Pause an asynchronous
mirroring job
• 22 ( Suspend ) - Pause a snapclone or
migration job
uint16 Operation
In only
The reference to the Synchronized or
GroupSynchronized association describing
the snapshot or job.
SNIA_Synchronized ref Synchronization
In only
This parameter is not used and shall be
null. SNIA_StorageSynchron-
ized ref
SyncPair
In only
This parameter is not used and must be
false.
boolean Force
In only
Method must wait until the following
CopyState for each operation is reached
before returning:
UnSynchronized - Resync Replica, Resume
Split - Pause an asynchronous mirroring
job
Suspended - Pause a snapclone or
migration job
uint16 WaitForCopyState
In only
This method does not affect the lifecycle of
this association and this parameter is not
used.
CIM_SettingsDefineState
ref
SettingsState
In only Null - This method does not create a job. CIM_ConcreteJob ref Job
SAN Virtualization Services Platform SMI-S User Guide 165