HP Identity Driven Manager Software Licenses User Manual
Page 198
4-20
Using the Secure Access Wizard
Using Secure Access Wizard
a. Select the check box for a RADIUS server to enable the server IP address
field, and then enter the IP address for the server.
The IP address will be validated. If it is invalid or a duplicated IP, a text
message indicating the error is displayed. You cannot continue until a valid
IP address is entered.
N o t e :
If you had previously configured other RADIUS servers for authentication with
the device, that information will be over-written by the Secure Access Wizard.
The SAW will attempt to remove enough currently configured RADIUS servers
to “make room” for the ones configured in the SAW. So, if you already have three
RADIUS servers configured on a device, and then the you configure two new
RADIUS servers via the SAW, when the settings are applied the SAW will remove
the first two servers from the device configuration.
26. Click Next to continue to the RADIUS Server Shared Secret window.
Figure 4-15. Secure Access Wizard, RADIUS Shared secret display
27. If you want to use the same RADIUS shared secret (password) for all the selected
devices, select the Use for all devices check box.