HP Identity Driven Manager Software Licenses User Manual
Page 193
4-15
Using the Secure Access Wizard
Using Secure Access Wizard
Figure 4-11. Secure Access Wizard, Advanced Wired Web-Auth
Advanced Web-Auth settings for wired devices include:
Option
Configures....
DHCP address
and mask
The base address and mask for the temporary pool used by DHCP
(base DHCP address default is 192.168.0.0, and the mask default
is 24 - 255.255.255.0).
Redirect URL
The URL that the user should be redirected to after successful
login. The default is no redirect (blank field).
DHCP lease
The lease length (days) of the IP address issued by DHCP (default
10). Valid values are 5-25.
Client limit
The maximum number of clients to allow on one port
simultaneously, default is 1. This option is available only when at
least one device supports Client Limit in the OK status in the IDM
Agent.
Re-auth period The re-authentication timeout (in seconds, default 0), set to 0 to
disable re-authentication. Valid values are 0-999999999.