HP Identity Driven Manager Software Licenses - Manual (Page 19)

2-3
Getting Started
Before You Begin
Figure 2-2. Server Information
For the Agent to communicate with the PCM server, these values MUST MATCH
the values set on the PCM server for this Agent.
a. If the Agent will initiate connection to the PCM server, select the Agent
Initiates Connection check box. If the PCM server will initiate a connection
to the Agent, ensure this check box is not checked.
All Agents that initiate connection to the PCM server must use the same
port number and encryption type as configured in the Agent Manager Server
Setup tab.
b. To change the default Port that the Agent will use to communicate with the
PCM server, clear the related Use Default check box and type the desired
port. The default PCM server port is 51111, which can be changed to any
unused port during PCM server installation or at the PCM server.
c. If you do not want to encrypt data sent to the PCM server, clear the related
Use Default check box and select Plain Text from the Encryption list. The
default encryption method is SSL. If the PCM server is behind a firewall,
HP recommends using SSL encryption.
d. In the IP Address field, type the IP address of the PCM server if the Agent
is initiating the connection to the PCM server.