HP Identity Driven Manager Software Licenses - Manual (Page 194)

4-16
Using the Secure Access Wizard
Using Secure Access Wizard
If a device does not support the selected setting, the value you set will appear
in the SAW display, but will not be configured on that device.
d. Click OK to save the advanced settings and close the window.
e. Click Next in the configuration window to continue to the
Authentication Servers step.
24. On the MAC-Auth Configuration window, select the MAC Address format to
be applied for RADIUS requests in the secure access settings for the selected
devices.
Logoff period The period of time (seconds) after which a client will be
considered removed from the port for a lack of activity. Disabled
by default, valid values are 0-999999999, 0 is disabled.
Quiet period The period of time the switch does not try to acquire a supplicant.
Valid values are 0-65535, the default value is 60 sec.
Max retries The number of times a client can enter their credentials before
authentication is considered to have failed (default 3). Valid values
are 1 - 10.
Server timeout The authentication server response timeout (default 30 sec). Valid
values are 1-300.
Max requests The maximum number of times the switch retransmits
authentication requests. Valid values are 1-10, the default value
is 2.
Unauth-vid The VLAN to which the port is assigned when the user has not
been authorized by web authentication. Valid values are any
defined VLAN, the default value is VLAN 1.
Auth-vid The VLAN to which the port is assigned when the user has been
authorized by web authentication. Valid values are any defined
VLAN, the default value is VLAN 1.
SSL login Whether to allow SSL login (https on port 443). This is disabled
(No) by default.
Allow client
moves Whether to allow client moves between ports. The default is
disabled (No).
Option Configures....