HP LaserJet 4300 Printer series - Manual (Page 60)

58 2 Printing tasks ENWW
Printing labels
Use only labels recommended for use in laser printers. Make sure that labels meet the correct
specifications. (See
“Labels” on page 190 .)
Do:
Print a stack of up to 50 label sheets from tray 1 or a stack of up to 100 label sheets from
other trays.
Load labels in tray 1 with the front side facing up, and the top, short edge toward the printer.
For other trays, load paper with the front side facing down, and the top edge toward you.
Try opening the rear output bin to reduce curl and other problems. (See “Printing to the rear
output bin” on page 37 .)
Do not:
Load the trays to maximum capacity because labels are heavier than paper.
Use labels that are separating from the backing sheet, wrinkled, or damaged in any way.
Use labels that have the backing sheet exposed. (Labels must cover the entire backing
sheet with no exposed spaces.)
Feed a sheet of labels through the printer more than once. The adhesive backing is
designed for only one pass through the printer.
Print on both sides of labels.
Print on sheets from which labels have been removed.
CAUTION Failure to follow these instructions can damage the printer.