Installing the optional envelope feeder, Clearing jams from the output areas – HP LaserJet 4300 Printer series User Manual
Page 56
54 2 Printing tasks
ENWW
Installing the optional envelope feeder
Use these steps to install the optional envelope feeder onto the printer.
To install the optional envelope feeder
1
Open tray 1.
2
Remove the plastic envelope-entrance cover from the printer.
3
Insert the optional envelope feeder firmly into the printer until it
latches into position. Pull outward on the optional envelope feeder
to be sure that it is securely in place.
1
2
3
This manual is related to the following products: