HP LaserJet 4300 Printer series - Manual (Page 42)

40 2 Printing tasks ENWW
To select the stapler at the control panel
1 Press S ELECT ( ) to open the menus.
2 Use U P ARROW ( ) or D OWN ARROW ( ) to scroll to CONFIGURE DEVICE , and then press
S ELECT ( ).
3 Use U P ARROW ( ) or D OWN ARROW ( ) to scroll to OUTPUT SETUP , and then press S ELECT
( ).
4 Use U P ARROW ( ) or D OWN ARROW ( ) to scroll to STAPLER/STACKER , and then press
S ELECT ( ).
5 Use U P ARROW ( ) or D OWN ARROW ( ) to scroll to ONE , and then press S ELECT ( ).
Note Selecting the stapler at the printer control panel changes the default setting to staple. It is possible
that all print jobs will be stapled.