Loading envelopes in tray1, Loading envelopes in tray 1 – HP LaserJet 4300 Printer series User Manual
Page 54
52 2 Printing tasks
ENWW
Loading envelopes in tray 1
Many types of envelopes can be printed from tray 1. Up to 10 can be
stacked in the tray. (See
for specifications.)
To load envelopes in tray 1
1
Open tray 1, but do not pull out the extension. (Most envelopes feed
best without the extension. However, oversize envelopes might
need the extension.)
2
Load up to 10 envelopes in the center of tray 1 with the front side
facing up, and the postage-end toward the printer. Slide the
envelopes into the printer as far as they will go without forcing them.
3
Adjust the guides to touch the envelope stack without bending the
envelopes. Make sure that the envelopes fit under the tabs and
maximum-height indicators on the guides.
4
To reduce curl and jams, open the rear output bin to use the
straight-through paper path. (See
“Printing to the rear output bin” on
1
2
3