HP XP P9000 Command View Advanced Edition Software - Manual (Page 458)

by prefix, so Replication Manager uses this prefix as a unique name to identify
copy group definition files created by HP StorageWorks P9000 for Business
Continuity Manager Software or P9000 mainframe agent.
P-VOL (primary
volume) The source volume that is copied to another volume using the volume replication
functionality of a storage system.
property files Generic term for the files that define the Replication Manager operating
environment. The Replication Manager operating environment can be modified
by changing the appropriate property files.
RACF (Remote
Access Control
Facility) Functionality for controlling user authentication and resource access on the
mainframe host.
RADIUS Remote Authentication Dial In User Service
RAID Manager Software used to control volume replication functionality (such as Continuous
Access or Business Copy) by means of commands issued from a host to a storage
system. A command device must be set up in the storage system to enable the
storage system to receive commands from P9000 RAID Manager.
In an open system, Replication Manager uses the P9000 RAID Manager
configuration definition files to modify copy pair configurations and to acquire
configuration information. Copy pair modification processing, such as splitting
and re-synchronizing copy pairs, is executed on the storage system by P9000
RAID Manager.
RCU Remote Control Unit
refresh The term refresh refers to updating the database that is maintained by
Replication Manager using the most recent information. This database stores
copy pair configuration information and copy pair status information obtained
from Device Manager servers, Device Manager agents, HP StorageWorks P9000
for Business Continuity Manager Software, and P9000 mainframe agent.
remote path A logical path linking storage systems that is used for remote copying (replication
of volumes between storage systems).
Remote Scan A volume scan that can be performed on Non Gen'ed volumes outside the site
where HP StorageWorks P9000 for Business Continuity Manager Software
resides. The remote DAD attribute is assigned to the disk configuration definition
file in which the discovered volumes are stored.
Route List A list that defines the relationship of the connections between the command
devices in storage systems and that indicates the routes of commands issued by
Business Continuity Manager. This list is required for performing operations such
as remote scans by a command device.
SAN Storage Area Network
SATA Serial ATA
SP-VOL
(secondary-primary
volume) The volume located in the middle of a cascade structure, when a cascade structure
is used by the volume replication functionality of a storage system. Indicates the
secondary volume in an upper level copy pair or the primary volume in a lower
level copy pair.
Glossary 458