HP Latex 360 Printer - Manual (Page 137)

7. To remove a printhead, lift up the blue handle.
8. Using the blue handle, gently disengage the printhead.
9. Gently pull the blue handle upward until the printhead is released from the carriage.
CAUTION: Do not pull abruptly. That action can damage the printhead.
CAUTION: If you want to preserve the old printhead for later use, reinstall the cap and plug, but never
install a clear optimizer cap or white plug on a non-optimizer printhead. Optimizer printheads have
clear caps and white plugs, while the other printheads have orange caps and plugs. Installing the wrong
cap and plug can cause irrecoverable printhead damage.
ENWW Replace a printhead 131