HP SAN User Manual
Hp storage san visibility 6.0 user guide
HP Storage SAN Visibility 6.0 User Guide
Abstract
This document describes how to use the HP Storage SAN Visibility user interface to review the topology and inventory in a
complex Storage Area Network (SAN) environment. This document is intended for users and HP authorized service providers
who use the HP Storage SAN Visibility software to obtain SAN analysis reports.
HP Part Number: 712618-001
Published: January 2013
Edition: Second
Table of contents
Document Outline
- HP Storage SAN Visibility 6.0 User Guide
- Contents
- 1 Overview
- 2 Install, repair, and remove SAN Visibility
- 3 Using SAN Visibility
- SAN Visibility GUI
- Using SAN Visibility
- Accessing the SAN Visibility GUI
- Specifying SAN details
- Supporting switch details
- Specifying host details
- Specifying customer details
- Specifying advanced settings (optional)
- Specifying HBA-Host map details (optional)
- Specifying FICON switch details (optional)
- Specifying type of SAN components to be displayed in the processed report (optional)
- Customizing SAN device labels to be displayed in the topology diagrams (optional)
- Checking compatibility between different SAN components
- Initiating data collection
- Data collection methods
- Sending raw data file to HP
- Viewing reports
- Comparing SAN
- Saving the current configuration file
- Opening an existing configuration file
- Exiting from SAN Visibility
- 4 Support and other resources
- A DCOM configuration
- B Troubleshooting
- C Error codes
- Glossary