HP SAN - Manual (Page 44)

Displays the list of hosts. Select an host from the list to view the detailed host
report. Hosts
Provides I/O performance statistics on a per port basis for each switch.
Performance charts are generated only when you have selected the Capture
Performance Data check box in the Data Collector screen. Performance Charts
Summarizes the zones identified and displayed in the fabric layout. If there
are multiple zones in a fabric, each zone and its member devices are displayed
in a separate table. Zone Report
For a Cisco switch, this report summarizes the VSANs identified and displayed
in the fabric layout. If there are multiple VSANs in a fabric, each VSAN and
its member devices are displayed in a separate table. VSAN Details
Provides best practice recommendations for each fabric, such as recommended
firmware versions on the switches, hanging zone, domain 1 warning, domain Recommendations
8 warning, duplicate domain warnings, and information on the firmware and
the driver compatibility of the HBAs and the switches that are directly or
indirectly connected with the HP Storage EVA 4000/6000/8000 class of disk
arrays, with V6 firmware.
Provides details of the FICON Channel Path's in the SAN, including the Channel
Path ID, LPAR, WWN, Firmware and Port details for each channel path. FICON Report
Provides details of all the SAN components seen by an NPIV enabled ports.
The report contains the port numbers on which the NPIV device is connected, NPIV Details (Switch)
the real and virtual WWPNs as seen by each port, and the zone names that
are part of the NPIV enabled ports and WWPNs.
Provides the details of all the NPIV configured ports of the HBA. It contains
virtual HBAs (VHBAs) and WWPNs of the associated physical HBAs. NPIV Details (HBA)
Summarizes the compatibility between various components in the SAN. The
Compatibility Analysis is done between the Host and Switch, Switch and
Storage systems, Host and Storage systems using HP SDG guidelines. Compatibility
Summarizes the outcome of analysis done on Fabric and Zone. Fabric Analysis
consists of running SAN Design Guide (SDG) rules on the SAN to check for Zone non-adherence
any potential non-adherence. The Fabric Analysis is done for HP or HP OEM
hardware only.
Summarizes the migration recommendation from EVA storage array to 3PAR
StoreServ storage array that are selected in the "Migration" wizard of SAN Migration Recommendation
Visibility tool during data collection. The analysis is done using the following
criteria:
◦
Compatibility between migrated Storage and existing switches in the fabric.
◦
Compatibility between migrated Storage and existing Host OSs in the fabric.
◦
Existing Switch and HBA component firmware.
◦
Driver recommendation with respect to migrated Storage.
Verifies that your HBA's driver is included with your Operating Environment
or to check which driver you need when adding a network or I/O HBAs. HP-UX Fibre Channel (td) Host
Bus Adapter Support Matrix
44 Using SAN Visibility