HP SAN - Manual (Page 28)

2. Click Remove.
The selected IOCP file is removed.
Specifying type of SAN components to be displayed in the processed report (optional)
HP Storage SAN Visibility provides an option to filter the type of SAN components you want to
view in your processed report.
NOTE: You can not filter a switch from the processed report. A switch can not be filtered from
the processed report as it is an integral part of the fabric and is required for SAN Visibility data
collection.
To specify the type of SAN components that you want to view in the processed report, complete
the following steps:
1.
Click Advanced Settings from the navigation area of the SAN Visibility GUI.
2. Click the Filter SAN Components tab. Figure 16 (page 28) displays the filter SAN components
details.
Figure 16 Filter SAN components window
3. Select Yes if you want to receive storage device details in the processed report.
4. Select Yes if you want to receive host and HBA details in the processed report.
5. Select Yes if you want to receive virtual machine details in the processed report.
If you select No, the processed report will not contain any descriptive details for the selected SAN
component.
28 Using SAN Visibility