HP SAN - Manual (Page 51)

To verify that the Local System account is configured for the IIS Admin service:
a.
Click the Start > Settings > Control Panel > Tools > Services.
b. Double-click WMI Service.
c. On the Log On tab, ensure that the option for Local System Account is selected.
d. Under Services, check the services listed to verify that each has the Log On option set to
the Local System account.
NOTE:
•
If host discovery and data collection fails, then ensure that the LAN Manager Authentication
Level is set to Send LM & NTLM responses by doing the following:
1.
Click Start, click Settings, click Control Panel, click Administrative Tools, click Local Security
Policy.
2. In the Local Security Settings dialog box, click Local Policies, and then click Security
Options.
3. Double-click Network Security: LAN Manager Authentication Level.
4. Select Send LM & NTLM responses.
5. Click OK and exit out of Local Security Settings.
•
If host discovery and data collection still fails then do the DCOM configuration as follows.
DCOM configuration impacts internal OS settings.
51