HP SAN - Manual (Page 47)

Opening an existing configuration file
SAN Visibility enables you to open an existing configuration file [.xml extension] that is created
and saved earlier by SAN Visibility.
To open an existing configuration file, complete the following steps:
1.
Select File > Open.
2. Locate and select the previously saved configuration file you want to open.
NOTE: Previously saved configuration files from SAN Visibility can be opened from SAN
Visibility. All profiles are saved in”< INSTALL_DIR >\Hewlett-Packard\HP
SANVisibility\profiles
"
3. Click Open.
The existing configuration is opened. The customer and configuration details (including SAN,
component group, and switch details) are populated and shown in the SAN Visibility GUI
window.
Exiting from SAN Visibility
To exit from SAN Visibility software, select File > Exit.
Using SAN Visibility 47