Customizing camera operation, Deactivating the af-assist beam, Deactivating the red-eye reduction lamp – Canon PowerShot G1 X Mark II User Manual
Page 54

54
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Customizing Camera Operation
Customize shooting functions on the MENU [
4] tab as follows.
For instructions on menu functions, see “Using Menus” (
Still Images
Deactivating the AF-Assist Beam
You can deactivate the lamp that normally lights up to help you focus when
you press the shutter button halfway in low-light conditions.
z
z
Press the <
n> button, choose
[AF-assist Beam] on the [
4] tab, and
then choose [Off] (
).
z
z
To restore the original setting, repeat this
process but choose [On].
Still Images
Deactivating the Red-Eye Reduction Lamp
You can deactivate the red-eye reduction lamp that lights up to reduce red-
eye when the flash is used in low-light shots.
1
Access the [Built-in Flash
Settings] screen.
z
z
Press the <
n> button, choose
[Flash Control] on the [
4] tab, and then
press the <
2
Configure the setting.
z
z
Choose [Red-Eye Lamp], and then
choose [Off] (
).
z
z
To restore the original setting, repeat this
process but choose [On].