Canon PowerShot G1 X Mark II - Manual (Page 187)

187
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
3
Insert the coupler.
z z Insert the coupler facing the direction
shown, just as you would a battery pack
(following step 2 in “Inserting the Battery
Pack” (
=
13 )).
z z
Make sure the coupler cable passes
through the port.
4
Close the cover.
z z
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
Terminals
Coupler Cable Port
5
Connect the power cord.
z z
Insert one end of the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
z z
Turn the camera on and use it as desired.
z z When finished, turn the camera off and
unplug the power cord from the outlet.
• Do not disconnect the adapter or unplug the power cord while
the camera is still on. This may erase your shots or damage the
camera.
•
Do not attach the adapter or adapter cord to other objects. Doing so
could result in malfunction or damage to the product.