Canon PowerShot G1 X Mark II - Manual (Page 106)

106
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
2 Configure the setting.
z z Press the <
o>
buttons or turn the
<
7> dial to choose the ring or button for
assignment.
z z
To assign functions to the ring or dial,
press the <
m> button, choose the ring
or dial on the screen displayed (either
press the <
o>
buttons or turn the
<
7> dial), and then press the
buttons to choose the function.
z z
To assign functions to the < > or <
E>
button, press the <
m> button, choose
the function on the screen displayed
(either press the <
o>
buttons or turn the <
7> dial), and then
press the <
m> button.
3
Use the assigned function as
needed.
z z
Turn < >< ><
7> to configure the
assigned function.
z z
When multiple functions are assigned to
the <
> ring, press the <
o> button to
switch between them.
z z
Press the < > or <
E> button to
activate the assigned function.
• When you assign [ ] or [ ] to the < > or < E> button, each press of the
assigned button records white balance data ( = 84 ), and the white balance
setting changes to [ ] or [ ].
• When you assign [ %] to the < > or < E> button, each press of the
assigned button adjusts and locks the focus. [
%] is then displayed.
• When you assign [ ] to the < > or < E> button, pressing the assigned
button deactivates screen display. To restore the display, do any of the
following.
- Press any button other than the power button
- Hold the camera in another orientation
- Open or close the screen
- Raise or lower the flash
• You can still record movies in [ ], [ E] and [ ] modes even if you assign a
function to the <
E> button.
• On the setting screen, you can also configure the functions assigned to
controls by touching the functions to switch and then [
].