Cop y – Canon VB-C60 User Manual
Page 79
Launch VK Viewer and Display the Configuration and Preferences Screen
79
4
Register
Camera
Ser
ver
and
Set
Recor
ding
Sc
hedule
Launch Storage Server by Specifying the IP address
If you installed the Viewer and Storage Server on separate PC, specify an IP address of
Storage Server and connect Viewer to the Storage Server.
Select Use IP address from
the drop-down menu.
Click Connect.
Enter the IP address or host
name of the Master Storage
Server in Host Name or IP,
and the port number in Port.
Click Connect.
Enter your User Name and
Password, and then click
Login.
5
4
3
2
1
The dialog for entering the IP address will also be displayed even
when connection to the Storage Server failed.
Tip
If you use a proxy server, you should change the Internet
option settings in the following procedure:
1. Select Start > Control Panel > Network and Internet >
Internet Option.
2. Select the Connection tab.
3. Click LAN settings.
Change the proxy server settings.
If using a proxy server between a Viewer and a Storage Server,
it should not perform response buffering. The Proxy Server
which is configured to perform response buffering may lead to
delays in sending small amounts of data (such as events) from
the Storage Server to the Viewer. You cannot use the Apache
proxy server since it perform response buffering.
You cannot send or receive audio when using a proxy server.
Note
COP
Y