Canon VB-C60 - Manual (Page 121)

121
4
Register
Camera
Ser
ver
and
Set
Recor
ding
Sc
hedule
Change Camera Server Settings
●
Preset
Presets should be set on the Camera Server in advance. You cannot set them with
VK-64/VK-16.
If the recording settings using a preset are used on the Camera Server, the preset
position will override camera positions set by VK-64/VK-16, including those in recording
schedules and Camera Server position. The camera control will be lost when starting to
control the camera at the Camera Server.
If predefined presets are not shown in the Preset drop-down menu even though they
have been defined on the Camera Server, click Camera Control to display the Camera
Control Panel, obtain camera control, then configure the settings again.
●
Restrict Service Time
If a Camera Server has been configured with Restrict Service Time enabled,
VK-64/VK-16 will be able to record from the Camera Server during restricted times.
●
External Device
Specify the name of the external device, such as sensor name. You cannot configure it
with VK-64/VK-16.
If the external device is not set on the Camera Server, VK-64/VK-16 cannot configure it.
●
Sensor Input, Recording to Camera Memory
Camera Servers have certain features to capture image into its memory based on
sensor input or schedule. If settings are enabled on the Camera Server, those settings
take precedence.
COP
Y