Canon VB-C60 - Manual (Page 141)

141
4
Register
Camera
Ser
ver
and
Set
Recor
ding
Sc
hedule
Set Preset Tour
If the following warning appears, change the settings according
to the tables below.
Warning example
* The tour time depends on the settings.
Click Cancel to return to the setting screen.
Click OK to save the current settings.
(If you are using the Preset Setting Tool, click Save on the setting page of the tool)
Endurance of VB-C50i and VB-C300's pan/tilt mechanisms are
approximately 100,000 round trips at the full range. The total tour
time depends on the combination of the movement rate,
movement range, and still time. Refer to the following tables.
Total tour time for 100,000 round trips in the pan direction (estimated).
Example: If the movement rate (PT) is 1, still time is 30 seconds,
and movement range (angle) in the pan direction is 50
degrees, it takes approximately 9,444 hours for 100,000
round trips in the pan direction.
Endurance of VB-C60's pan/tilt mechanism is approximately
300,000 round trips at the full range.
Total tour time for 300,000 round trips in the pan direction (estimated).
Movement rate (PT) is 1. Movement rate (PT) is 2.
Note
Movement rate (PT) is 1.
Still time
Movement range in the
pan direction (angle)
0
10
20
30
50
3872
5666
7555
9444
100
3825
4722
5666
6611
150
3809
4407
5037
5666
(Unit: Time)
(sec.)
0
10
20
30
50
1983
3777
5666
7555
100
1936
2833
3777
4722
150
1920
2518
3148
3777
Movement rate (PT) is 2.
Still time
Movement range in the
pan direction (angle)
(Unit: Time)
(sec.)
Still time
Movement range in the
pan direction (angle)
(sec.)
±50 ±100 ±150
0 11616 11475 11427
10 17000 14166 13222
20 22666 17000 15111
30 28333 19833 17000
(Unit: Time)
Still time
Movement range in the
pan direction (angle)
(sec.)
±50 ±100 ±150
0 5950 5808 5761
10 11333 8500 7555
20 17000 11333 9444
30 22666 14166 11333
(Unit: Time)
COP
Y