Canon VB-C60 - Manual (Page 274)

274
Messages Cause
An error occurred while saving the
settings in the Master Storage
Server.
The host name of the Master
Storage Server is invalid. Check the
host name or IP address.
The port number of the Master
Storage Server is invalid. Specify a
number in the range of 1 and
65535.
All schedules configured for the
‘camera server name’ will be
deleted. Select “Yes” to continue, or
select “No” to cancel.
There are no events.
Specify the start time and end time
so that the time interval is 1 hour or
shorter.
The recorded video data cannot be
read.
Failed to extract the video after
{hh}:{nn}:{ss} because two or more
MPEG-4 tracks are included in the
selected time period.
The name is not specified. Check
the settings and try again.
A user layout cannot be specified in
shared layout sequences.
Delete the following layout before
saving the shared layout sequence.
Specify the frame rate for the
motion detection settings between
‘fps’ and ‘fps’.
Specify the recording frame rate
between ‘fps’ and ‘fps’.
Camera
Summary
window
Connect to
Master Storage
Server dialog,
Connection
Error dialog
Edit Camera
Server dialog
Event Search
dialog
Extract Video
dialog
Folder Name
dialog
Layout
Sequence dialog
Motion Detection
Settings dialog
Messages List
An attempt was made to save the
settings, however, saving the Master
Storage Server settings failed.
An attempt was made to connect with
an invalid host name/IP address.
An attempt was made to connect with
an invalid port number.
OK was pressed in the Edit Camera
Server dialog when a change was
made to the camera registered in the
camera server.
No events to be displayed in Event
Search were found.
An attempt was made to configure
the time using a value longer than 1
hour.
The recorded video at the specified
time cannot be read.
You attempted to use Extract Video
to save recorded video for a time
range that spans two or more MPEG-
4 recording schedules.
An attempt was made to add a layout
folder without entering the name.
An attempt was made to change the
layout sequence that contains a
personal layout sequence to a shared
layout sequence.
An invalid value was selected for the
motion detection frame rate.
An invalid value was selected for the
motion detection recording frame
rate.
COP
Y