Canon VB-C60 - Manual (Page 273)

273
9
Tr
oub
leshooting
メッセージ 原因 Messages Cause
The connection to the camera
server has been disconnected.
An error relating to the camera
server connection occurred.
Specify the weekday.
Specify the recording mode.
Specify the recording frame rate
between ‘fps’ and ‘fps’.
The maximum value of the pre-
event recording is 30 seconds.
The change cannot be saved
because it cannot be sent to the
Storage Server ‘Storage Server
name’.
‘Communication Error Messages -
Details’
Are you sure you want to delete the
Storage Server ‘Storage Server
name’?
Are you sure you want to delete the
location ‘location name’?
Are you sure you want to delete the
zone ‘zone name’?
Are you sure you want to delete this
camera server ‘camera server
name’?
Do you want to save the changes in
the server registration?
Add/Edit Camera
Server dialog,
Add/Edit
Recording
Schedule dialog,
Motion Detection
Settings dialog,
Sensor Event
Settings dialog
Add/Edit
Recording
Schedule dialog
Add/Edit
Recording
Schedule dialog,
Motion Detection
Settings dialog
Camera
Summary
window
Messages List
An error relating to the camera server
connection occurred.
An unknown error relating to the
camera server connection occurred.
OK was pressed without specifying
the weekday.
OK was pressed without selecting
the recording mode check box.
An invalid recording frame rate was
entered.
OK was pressed after configuring a
value exceeding 30 seconds for the
pre-event time value.
An error occurred while saving the
settings in the Camera Summary
window.
An attempt was made to delete a
Storage Server other than the Master
Storage Server.
An attempt was made to delete the
location.
An attempt was made to delete the
zone.
An attempt was made to delete the
camera server.
An attempt was made to close the
Camera Summary window without
saving the changes.
COP
Y