Canon VB-C60 - Manual (Page 126)

126
Set Motion Detection Recording
●
Step 2: Set Motion Detection Options
Set the following options on the Motion Detection Settings dialog.
In the Detect Motion Using menu, select
one of the following:
Storage Server
Obtains video from the Camera Server and
detects motion with the Storage Server.
Camera Server
Uses the Motion Detection function of the
Camera Server to detect motion (This
menu is only active for VB150 servers with
the Video Input set to Single or VB-C60,
VB-C50i/VB-C50iR, VB-C50FSi, VB-
C50Fi).
In the Analysis Frame Rate menu, select from 0.1 to 30 frames per second.
If you select the Camera Sever to detect motion, Settings becomes available. Settings is
now enabled. Click to launch your VB Admin Motion Detection Setting Tool. Install the VB
Admin Tools that is bundled with the VB-C60, VB-C50i/VB-C50iR, VB-C50FSi, and VB-
C50Fi in advance. Refer to the Camera Server’s User’s Manual for how to configure the
motion detection settings.
2
1
To use the Motion Detection function of the VB-C50i/VB-C50iR,
VB-C50FSi and VB-C50Fi, it is necessary to configure
schedules from the “VB Admin Schedule Setting Tool”.
Setting motion detection at the Storage Server causes high
CPU load. It is strongly recommended to set motion detection
at the Camera Server whenever it has the motion detection
function.
Detect Motion Using cannot be set to Storage Server when the
resolution is set to MPEG-4.
Note
COP
Y