Canon VB-C60 - Manual (Page 124)

124
Set Motion Detection Recording
Set Motion Detection Recording Settings
The Motion Detection recording starts when a motion has been detected.
Configure the Motion Detection recording settings in the Motion Detection Settings
window which appears when you click Settings.
Some items in the Motion Detection Settings window overlap with the items in the
Add/Edit Schedule Item dialog. In Motion Detection recording, the settings in the Motion
Detection Settings window take precedence. Preset and Exposure Compensation
settings in the Add/Edit Schedule dialog are applied to the Motion Detection recording.
The Motion Detection function is not suitable for conditions
where high reliability is required. It is not recommend using
this function in situations where high reliability is required,
such as for monitoring purposes. Canon accepts no liability
whatsoever for faults, etc. resulting from the use of the Motion
Detection.
Motion detection is performed by the Storage Server or
Camera Server (whichever selected in the Motion Detection
Settings window). If the Camera Server executes motion
detection, motion detection is not available while the Camera
Server is performing the pan, tilt, or zoom operation (motion
detection by the Storage Server is available during these
operations).
If the recording schedule expires during Motion Detection
recording, the Motion Detection recording also terminates.
Note
Edit Motion Detection Recording Settings
You can specify the detection area and the amount of sensitivity for Motion Detection
Recording. The area for detection can also be modified which is ideal, for example, if the
field of view has two entrances and you wish to monitor motion for one entrance.
VK-64/16 VK-64/16
COP
Y