Brother PE-DESIGN Ver.432 - Manual (Page 92)

83
Bef
ore Using
Design Center
La
y
out & Editing
File Utility
Programmable
Stich Creator
Contents
Quik Ref
erence
Alphabetic Inde
x
Getting Star
ted
NOTE:
The maximum value that can be entered is the largest value that will not allow the pattern to
exceed the size of the Design Page.
The minimum value is 1 mm (0.04 inch).
■ Numerical Setting-Rotate
Purpose: Rotates the selected pattern numerically.
Shortcut key: No shortcut key for this function.
Toolbar: No button for this function.
Operation:
1 Select one or more patterns.
2
Click Edit, then Numerical Setting, then Rotate.
The Rotate dialog appears.
NOTE:
The range of values that can be entered is between 0 and 359 degrees, in 1-degree increments.
◆ Click OK to confirm.
◆ Click Preview to view the pattern at the
new size in the Design Page.
◆ Click Cancel to exit without making any
changes.
◆ The desired rotation angle can be
entered by either typing in a value or
clicking the arrows to select the desired
value.
Select 0 degree to leave the pattern
unchanged.
◆ Click OK to confirm.
◆ Click Preview to view the pattern
rotated the specified angle in the
Design Page.
◆ Click Cancel to exit without making any
changes.