Installing the software, System requirements, Installing – Brother PE-DESIGN Ver.432 User Manual
Page 12: Installing 1

3
System Requirements
Before you start installing the software on your PC, check that your system meets the following require-
ments. If it does not, consult your dealer.
Installing
1
Start Windows (refer to the Windows manual).
•
If you have other Windows applications running,
click
Cancel
to exit, close all the other applications
and start again.
•
If a previous version of this software is already
installed, uninstall it before installing this version
of the software.
2
Insert the CD-ROM into the CD-ROM drive. The
installer starts up automatically and displays a
dialog allowing you to select the language.
If the installer does not start up automatically:
•
Click .
•
Click
Run
on the menu. The
Run
dialog
appears.
•
Type the full path of the installation program.
Example:
D:\Setup
if the CD-ROM is in drive
D, or
E:\Setup
if the CD-ROM is in drive E.
3
Select the desired language, and then click OK.
PC
IBM-PC or compatible
CPU
486 or Later (we recommend Pentium or higher)
Windows
Windows 95 or Windows 98
Memory
32M or more (we recommend 64M or more)
Hard disk free space
15M or more
Display
SVGA (800
×
600) or more, High color (65536 colors) or more
Serial port
An RS-232C port that is not used with other peripherals
Mouse
A mouse that is supported by your version of Windows.
Printer
A graphic printer that is supported by your system (if you wish to print
your images)
Installing the Software
3