When setting the stitch and pattern directions of a programmed stitch, take note that whenever the
stitch and pattern direction settings cause the stitch to be sewn in the same direction as a line in a
stitch pattern, that line will not be sewn.

Use the preview function of your application to view exactly how your stitch pattern will be sewn
and set the stitch direction and pattern direction according to the selected stitch or to the effect
that you want to produce. To get an even better view, make test samples of different settings.

Example of a programmed fill stitch

Browse

Opens the

Browse

dialog. Select the directory of the folder containing

the

pas

file you want to open. Scroll through the available stitch pat-

terns and double-click the desired pattern or click

to select the

pattern.

Pattern size

Width

Sets the stitch pattern width.
Range: 5 ~ 10 mm (0.20 ~ 0.39 inch)
Default: 7.5 mm (0.30 inch)

Height

Sets the stitch pattern height.
Range: 5 ~ 10 (0.20 ~ 0.39 inch)
Default: 7.5 mm (0.30 inch)

Row/column
offset

Row

Sets the position of the stitch pattern rows when the

row

radio button

is clicked.
Range: 0 ~ 99%
Default: 0 %

Column

Sets the position of the stitch pattern columns when the

column

radio

button is clicked.
Range: 0 ~ 99%
Default: 0 %

Pattern direction

Allows you to rotate the angle of the stitch patterns.
Range: 0 ~ 359 degrees
Default: 0 degrees

Ex. 2:
Stitch direction: 90˚

Ex. 1:
Stitch direction = Default: 45˚

Example 3:
Stitch direction: 0˚