Exit – Brother PE-DESIGN Ver.432 User Manual
Page 151
142
Printing a Design Page for an extra-large embroidery frame
When
Actual Size
is selected:
1
Prints the entire Design Page at actual size
(However, for a 130
×
300 mm or 300
×
130 mm Design Page, a reduced image of the Design
Page is printed.)
2
Prints the pattern in the section of the Design Page that would be sewn with the first embroidery
frame installation position
3
Prints the color order for the pattern in the section of the Design Page that would be sewn with the
first embroidery frame installation position
4
Prints the pattern in the section of the Design Page that would be sewn with the second embroi-
dery frame installation position
5
Prints the color order for the pattern in the section of the Design Page that would be sewn with the
second embroidery frame installation position
:
This continues until all of the sewing data is printed.
When
Reduced Size
is selected:
1
Prints the entire Design Page at actual size
(However, for a 130
×
300 mm or 300
×
130 mm Design Page, a reduced image of the Design
Page is printed.)
2
Prints the pattern and its color order for the section of the Design Page that would be sewn with
the first embroidery frame installation position
3
Prints the pattern and its color order for the section of the Design Page that would be sewn with
the second embroidery frame installation position
:
This continues until all of the sewing data is printed.
NOTE:
In addition, when the
File Print Preview
command is selected, each section of the pattern is dis-
played as mentioned above.
■
Exit
Purpose:
Exits the application.
Shortcut key:
+
Toolbar:
No button for this function
Operation:
1
Click
File
, then
Exit
.
If the current Design Page is not edited, the application closes immediately.
2
If the current Design Page is edited, you will be asked whether you want to save the changes. See
“Open” on page 132.
See also:
“Save” on page 137, “Save As” on page 137
Alt
F4