Brother PE-DESIGN Ver.432 - Manual (Page 204)

195
Bef
ore Using
Design Center
La
y
out & Editing
File Utility
Programmable
Stich Creator
Contents
Quik Ref
erence
Alphabetic Inde
x
Getting Star
ted
File Menu
The File menu allows you to execute commands regarding the files, such as opening and saving.
■ New
Purpose: Creates a new blank work area.
Shortcut key: +
Toolbar:
Operation:
1 Click File , then New .
If the current work area is not edited, a new blank work area appears immediately.
2 If the current work area is edited, you will be asked whether you want to save the changes, for
example:
A new blank work area appears.
See also: “Open”, “Save” and “Save As” in this section
■ Open
Purpose: Opens a previously saved programmed stitch file.
Shortcut key: +
Toolbar:
New Creates a new blank work area. page 195
Open Opens a previously saved programmed stitch file. page 195
Save Saves your work area on the disk. page 196
Save As Saves the current stitch pattern under a new file name. page 197
Exit Exits the application. page 197
◆ Click Yes to save the work area first.
◆ Click No to abandon the work area.
◆ Click Cancel to do anything else (for exam-
ple, modify the current work area or saving
it with another file name).
Using the Menu Bar
Ctrl N
Ctrl O