Setting up – Brother PE-DESIGN Ver.432 User Manual
Page 11
2
IMPORTANT: Be sure the PC is turned off before
making any connection.
1
Plug the supplied interface cable into an RS-
232C serial port of your PC.
•
Choose a port that is not used for another periph-
eral.
•
In the
File Utility
application, choose the default
port
AUTO
if no other peripheral is connected.
Choose the first available
COM
port if other
peripherals are connected to your computer.
See Serial Port Setting on page 188.
•
The PC end of the interface cable has two differ-
ent pin connectors. Use the appropriate pin con-
nector for your computer.
2
Plug the interface cable into the unit.
3
Connect the AC adapter to the unit.
4
Plug the AC adapter into a wall outlet to turn it
on.
5
Turn the PC on.
IMPORTANT: It is not recommended to turn a
peripheral on/off while the PC is on. Make it a
habit to turn on all the peripherals (this unit, the
printer, the CRT display…) before you turn your
PC on, and to turn the PC off before turning the
peripherals off.
Setting Up
1
2
3
4
5