Text sew type – Brother PE-DESIGN Ver.432 User Manual
Page 133
124
Operation:
1
Type the desired value in the Transform level selector (0 ~ 100%) and press the
key
or
click on the Transform level selector to display the available values.
2
Click the desired value.
The setting applies to all the transformed text patterns that you will create in the Text Input mode
until you change the setting.
If a text pattern is selected, the setting also applies to the selection.
See also:
“Text Input Mode” on page 111 and “Transform Text” on page 156
■
Text Sew Type
Purpose:
Selects the stitch type for the text.
Available:
When you click
on the Tool Box to start the Text Input mode.
When you select existing text patterns with the cursor in Selection mode.
When you select characters with the cursor in Point Edit mode.
Operation:
1
Click the
Text Sew Type
selector.
The list of the available stitches displays.
2
Click the desired stitch.
The setting applies to all the text patterns that you will create in the Text Input mode until you
change the setting.
If a text pattern or characters of a text pattern are selected, the setting also applies to the selec-
tion.
See also:
“Text Input Mode” on page 111, “Point Edit Mode” on page 106
Enter
50%
100%