Delete, Mirror-horizontal, Mirror-vertical – Brother PE-DESIGN Ver.432 User Manual
Page 209: Rotate

200
■
Delete
Purpose:
Removes the selected line(s) from the screen without saving them in the clip-
board.
Shortcut key:
Toolbar:
No button for this function
Operation:
1
Select one or more lines.
2
Click Edit, then Delete.
The selected line(s) are removed from the screen. Since they are not saved in the clipboard, the
only way to make them reappear is to use Edit - Undo.
See also:
“Undo” on page 198 and “Cut” on page 199
■
Mirror-Horizontal
Purpose:
Flips the selected line(s) up/down.
Shortcut key:
+
Toolbar:
Operation:
1
Select one or more lines.
2
Click Edit, then Mirror, then Horizontal.
The selected line(s) are replaced by their horizontal mirror image (top and bottom inverted). Two
successive applications of this function restores the original image.
See also:
“Mirror-Vertical” and “Rotate” below
■
Mirror-Vertical
Purpose:
Flips the selected line(s) left/right.
Shortcut key:
+
Toolbar:
Operation:
1
Select one or more lines.
2
Click Edit, then Mirror, then Vertical.
The selected line(s) are replaced by their vertical mirror image (left and right inverted). Two suc-
cessive applications of this function restores the original image.
See also:
“Mirror-Horizontal” above and “Rotate” below
■
Rotate
Purpose:
Allows you to manually rotate the selected line(s) by an arbitrary angle.
Shortcut key:
+
Toolbar:
Delete
Ctrl
H
Ctrl
J
Ctrl
Y