Brother DCP 9040CN - Manual (Page 55)

Scanning
47
2
Scanning a document using the WIA driver
(For Windows
®
XP/ Windows Vista
®
)
2
WIA compliant
2
For Windows ® XP /Windows Vista ® you can choose Windows ® Image Acquisition (WIA) for scanning images
from the machine. You can scan images directly into the PaperPort™ 11SE viewer that Brother included with
your machine or you can scan images directly into any other application that supports WIA or TWAIN
scanning.
Accessing the Scanner
2
a
Start the ScanSoft™ PaperPort™ 11SE software that was installed during the MFL-Pro Suite installation
to scan a document.
Note
The instructions for scanning in this Guide are for when you use ScanSoft™ PaperPort™ 11SE. The
scanning steps may vary when using other software applications.
b
Click File, then Scan or Get Photo. You can also click the Scan or Get Photo button.
The Scan or Get Photo panel appears on the left side of the screen.
c
Click Select button.
d
Choose the scanner you are using from the Available Scanners list.
Note
• For Windows ® XP/Windows Vista ® :
Choose WIA-Brother MFC-XXXX (WIA-Brother DCP-XXXX) or WIA-Brother MFC-XXXX LAN
(WIA-Brother DCP-XXXX LAN).
• For other operating systems:
Choose Brother MFC-XXXX (Brother DCP-XXXX) or Brother MFC-XXXX LAN (Brother DCP-XXXX
LAN). (Where XXXX is your model name)
e Check the Display scanner dialog box on the Scan or Get Photo panel.