Brother DCP 9040CN - Manual (Page 183)

Scanning
175
9
i
The file name is set automatically. However, you can create a name of your choice using the dial pad.
You can only change the first 6 digits of the file name.
Press OK.
Note
Press Clear/Back to delete the letters you entered.
j
Press Black Start or Color Start to start scanning.
Note
Scan type depends on the settings in the Function Menu or the setting set manually on the panel,
Black Start or Color Start do not change the settings.
CAUTION
The LCD shows Scanning while reading the data. DO NOT unplug the power cord or remove a USB flash
memory drive from the machine while it is reading the data. You could lose your data or damage the card.
Changing the default setting
9
a For MFC models, press Menu, 5, 2, 1.
For DCP-9045CDN, press Menu, 4, 2, 1.
b Press a or b to choose Color 150 dpi, Color 300 dpi, Color 600 dpi, B&W 200 dpi or
B&W 200x100 dpi.
Press OK.
c
Do one of the following:
„ For black and white file format:
Press a or b to choose TIFF or PDF.
Press OK.
„ For Color file format:
Press a or b to choose PDF or JPEG.
Press OK.
d Press Stop/Exit.