Brother DCP 9040CN - Manual (Page 119)

Brother PC-FAX Software (MFC models only)
111
6
b
Enter this information to create the fax header and cover page.
Note
You must enter Name and Fax Number information to meet the Telephone Consumer Protection Act of
1991 requirements.
c
Click OK to save the User Information.
Note
You can set up the User Information separately for each Windows ® account.
Sending setup
6
From the Brother PC-FAX Setup dialog box, click the Sending tab to display the screen below.
„ Outside line access
Enter a number to access an outside line here. This is sometimes required by local PBX telephone
systems (for example, dialling 9 to get an outside line in your office). For PC-Fax send, this number will be
applied and Dial Prefix set in the function menu will be ignored.
„ Include header
To add the header information you entered in the User Information tab to the top of your sent faxes, check
the Include header box. See Setting up user information on page 110.