Brother DCP 9040CN - Manual (Page 144)

Printing and Faxing
136
8
Calibration
8
The output density for each color may vary depending on the environment the machine is in such as
temperature and humidity. Calibration helps you to improve the color density.
a
For MFC-9440CN and MFC-9450CDN, press Menu, 4, 5.
For MFC-9840CDW, press Menu, 4, 6.
For DCP-9040CN and DCP-9042CDN, press Menu, 3, 5.
For DCP-9045CDN, press Menu, 3, 6.
b Press a or b to select Calibrate.
c
Press OK.
d
Press 1 to select Yes.
You can reset the calibration parameters back to those set at the factory.
a For MFC-9440CN and MFC-9450CDN, press Menu, 4, 5.
For MFC-9840CDW, press Menu, 4, 6.
For DCP-9040CN and DCP-9042CDN, press Menu, 3, 5.
For DCP-9045CDN, press Menu, 3, 6.
b
Press a or b to Reset.
c Press OK.
d Press 1 to select Yes.
Note
If an error message is displayed, press Stop/Exit and try again. For more information, see
Troubleshooting and routine maintenance in the User’s Guide.