Brother DCP 9040CN - Manual (Page 45)

Printing
37
1
„ Toner Save Mode
You can conserve toner using this feature. When you set Toner Save Mode to On, print appears
lighter. The default setting is Off.
Note
We do not recommend Toner Save Mode to On for printing Photo or grayscale images.
„ Color/Mono
You can change the Color/Mono settings as follows:
• Color
If you want the printer to use Color mode even when printing monochrome document, select this
mode.
• Mono
Select this mode if your document has only black and grayscale text and/or objects. Mono mode
makes the print processing speed faster than color mode. If your document contains color,
selecting Mono mode prints your document in 256 levels of gray.
• Auto
The printer checks the content of your documents for color. If color is detected, it prints in color. If
no color content is detected, it prints in monochrome. This operation may reduce the total printing
speed.
Note
If the Cyan, Magenta or Yellow toner runs out, choosing Mono will allow you to keep printing as long as
the Black toner does not run out.
„ Gamma Correction
You can adjust the brightness of documents compared to the image on the screen.
„ Color Mode
The following options are available in Color Mode:
• Normal
This is the default color mode.
• Vivid
The color of all elements are adjusted to become a more vivid color.
„ Improve Gray Color
You can improve the image quality of the shaded area.
„ Enhance Black Printing
If a black graphic cannot print correctly, choose this setting.
„ Halftone Screen Lock
Stops other applications from modifying the Halftone settings. The default setting is on.