Manual recording – Milestone M50 User Manual
Page 78

Milestone Husky M30/M50
Administrator's Manual
www.milestonesys.com
78
Advanced configuration
Dual stream:
This feature is only available on cameras supporting dual stream.
Name
Description
Enable dedicated live stream
This additional stream feature lets you use the alternative stream of
the camera. It enables two independent streams to the recording
server
—a stream for live viewing and another stream for recording
purposes, with different resolution, encoding, and frame rate.
Stream
Select the type of the live stream. Stream settings for viewing live
video and for recording video may very well be different in order to
get the best result.
Resolution
Select the resolution of the camera.
FPS
Select the camera's live frame rate per second (FPS)
Manual recording
When you configure video and recording (see "About video and recording configuration" on page 64),
you can specify certain properties for many cameras in one go. In the case of Manual recording, it is
because the properties are shared by all cameras.
When manual recording is enabled, Smart Client users with the necessary rights (see "Configure user
and group rights" on page 166) can manually start recording if they see something of interest while
viewing live video from a camera which is not already recording.
If enabled, manual recording can take place even if recording for individual cameras (see "Recording"
on page 90) is set to Never or Conditionally.
When started from the Smart Client, such user-driven recording will always take place for a fixed time,
for example for five minutes.
Name
Description
Enable manual recording
Select check box to enable manual recording and specify further
details.
Default duration of manual
recording
Period of time (in seconds) during which user-driven recording take
place. Default duration is 300 seconds, corresponding to five
minutes.
Maximum duration of manual
recording
Maximum allowed period of time for user-driven recording. This
maximum is not relevant in connection with manual recording
started from the Smart Client, since such manual recording will
always take place for a fixed time. In some installations it is,
however, also possible to combine manual recording with third-
party applications if integrating these with Milestone Husky product
through an API or similar, and in such cases specifying a maximum
duration may be relevant. If you are simply using manual recording
in connection with the Smart Client, disregard this property.