Milestone M50 - Manual (Page 173)

Milestone Husky M30/M50 Administrator's Manual
www.milestonesys.com 173 Advanced configuration
Name Description
Port:
Type in the port number for your Video push driver. The default
port is 80. The port is for communication between the Milestone
Mobile server and your XProtect server.
Important: The port number you set must be identical with the
port number you set when you specify your Video push settings
(see "Video Push" on page 174). If the port numbers are not
identical, your Video push channel will not work.
User name:
Select the same user name as associated with the Video push
channel when you added (see "Add a Video push channel" on
page 172) this.
Password:
Type in the password for the Video push driver. The password for
your Video push driver is Milestone (this cannot be changed).
Hardware Driver:
Select the Video push driver.
Verified:
Select if the Video push driver runs on a secured HTTPS
connection.
Once finished, go back to your Milestone Mobile server > Video Push tab and click Find Cameras to
finish setting up the Video push channel.
Mobile server settings
General
Fill in and specify general settings for the Mobile server:
Name Description
Server name Name of the Mobile server.
Description Description of the Mobile server.
Mobile server
Choose between all Mobile servers currently installed to the
specific XProtect system. Only Milestone Mobile servers that are
running are shown in the list.
Connection type
Possible methods are: HTTP only, HTTP and HTTPS or HTTPS
Only.
Client timeout (HTTP)
Default time frame (30 sec.) for how often the Mobile server client
must indicate to the Mobile server server that it is up and running.
Milestone recommends that you do not increase the time frame.
Login method
Select how you want to log in to the Mobile server server should
take place. Possible methods are: Automatic, Windows Only or
Basic Only.
XProtect Web Client Enable the use of XProtect Web Client.
Enable all cameras view
Enable/disable viewing of All Cameras view. This view contains all
cameras on a recording server (user rights permitting).