Milestone M50 - Manual (Page 33)

Milestone Husky M30/M50 Administrator's Manual
www.milestonesys.com 33 Licenses
Change SLC
If you need to change your SLC and have received a new permanent license file (.lic) from Milestone
via e-mail and saved it to a location accessible from the Management Application, you are ready to
import it to your system.
1. On the Management Application's toolbar, click File > Manage License Offline > Import
License, and select your saved .lic file to import it.
2. When the new permanent license file is successfully imported, click OK.
About replacing cameras
If you remove a camera from a recording server, you also free a license. You can replace a licensed
camera and activate and license a new camera instead. The total number of purchased device
channels corresponds to the total number of cameras that can run on the surveillance system
simultaneously.
When you replace a camera, you must use the Management Application Replace Hardware Device
wizard (on page 60) to map all relevant databases of cameras, microphones, inputs, outputs, etc.
Remember to activate the license once you are finished.